|
Includes 1MΩ
potentiometer with knob, washers and nut. A reference scale is also
included. Suitable for use with Solar B Series Timers (e.g. BIDO) only. We
recommend the use of shielded (screened) cable between remote
potentiometer and input to timer. The connections on all Solar B Timers
are across pins 5 and 6, except B1DN use pins 8 and 9. For Solar B
Recycling timers use pins 5 and 6 for OFF time and pins 8 and 9 for ON
time. (note if using remote pot on recycling timers one set of output
contacts will be lost).
Note: Units calibrated and
numbered to each potentiometer when supplied.
Not available on DFM and ARM |
