LG DMPR Specifications

Model No.			DMP06-S	DMP60-S	DMP06-T	DMP60-T
Wiring			Screw type		Tunnel type
Panel mount			Unit
Operating time			Select either reverse time characteristics or definite time characteristics
Protection
	Over current		According to the setting time
	Phase failure		3 seconds
	Reverse phase		Within 0.1second
	Asymmetry		5 seconds
	Stall		5 seconds
	Lock		Within 0.5 second
	Under current		3 seconds
	Ground fault		Within 0.05 ~ 1 second. Selectable (0.05 ~ 1.0 second)
	Short circuit	(note²)	Within 50ms
Alarm			Variable (60 ~ 110% of the setting current)
Current setting range (Amps)			0.5 ~ 6	5 ~ 60	0.5 ~ 6	5 ~ 60
Motor capacity		220 ~ 240V	0.09 ~ 0.75	1.1 ~ 11	0.09 ~ 0.75	1.1 ~ 11
		380 ~ 440V	0.12 ~ 1.5	2.2 ~ 22	0.09 ~ 1.5	2.2 ~ 22
Time setting	Definite time	Delay in starting	0 ~ 60 seconds
		Delay in operating	0 ~ 30 seconds
	Inverse time		0 ~ 60 seconds
	Reset		Manual reset
Tolerance	Current		±5%
	Time		±5% (or ± 0.5sec)
Operating power		Voltage (note³)	AC 190 ~ 250V
		Frequency (note³)	60Hz (50Hz)
Aux. contact
	OL	2-SPST	3A/250V AC Resistive load
	AL	SPST	3A/250V AC Resistive load
Insulation resistance			Over DC 500V 100MΩ
Surge impulse voltage (IEC1000-4-5)			1.2 X 50μS 6kV (Apply standard wave form)
Fast transient burst (IEC1000-4-4)			2.5kV/5min
Environment	Temperature	Operation	-25°C ~ 70°C
		Storage	-30°C ~ 80°C
	Humidity		-30% ~ 90%RH (No freezing)
Display	7-Segment		3-phase current, cause of a fault
	Bar-graph		60% ~ 110% of real load current
Mounting type			35mm DIN-rail/Panel
Note 1.) In extension type, the digital EMPR is calibrated by combining the display part and the main-body. Do not order the 'Display and the Main body' separately using different part numbers they must be ordered as a complete item so they can be calibrated.
Note 2.) Instantaneous short circuit protection is optional.
Note 3.) Operational voltage of AC 110V and 50Hz is optional.

Model No.			DMP06-SE	DMP60-SE	DMP06-TE	DMP60-TE
Wiring			Screw type		Tunnel type
Panel mount			Extension (note¹)
Operating time			Select either reverse time characteristics or definite time characteristics
Protection
	Over current		According to the setting time
	Phase failure		3 seconds
	Reverse phase		Within 0.1second
	Asymmetry		5 seconds
	Stall		5 seconds
	Lock		Within 0.5 second
	Under current		3 seconds
	Ground fault		Within 0.05 ~ 1 second. Selectable (0.05 ~ 1.0 second)
	Short circuit	(note²)	Within 50ms
Alarm			Variable (60 ~ 110% of the setting current)
Current setting range (Amps)			0.5 ~ 6	5 ~ 60	0.5 ~ 6	5 ~ 60
Motor capacity		220 ~ 240V	0.09 ~ 0.75	1.1 ~ 11	0.09 ~ 0.75	1.1 ~ 11
		380 ~ 440V	0.09 ~ 1.5	2.2 ~ 22	0.09 ~ 1.5	2.2 ~ 22
Time setting	Definite time	Delay in starting	0 ~ 60 seconds
		Delay in operating	0 ~ 30 seconds
	Inverse time		0 ~ 60 seconds
	Reset		Manual reset
Tolerance	Current		±5%
	Time		±5% (or ± 0.5sec)
Operating power		Voltage (note³)	AC 190 ~ 250V
		Frequency (note³)	60Hz (50Hz)
Aux. contact
	OL	2-SPST	3A/250V AC Resistive load
	AL	SPST	3A/250V AC Resistive load
Insulation resistance			Over DC 500V 100MΩ
Surge impulse voltage (IEC1000-4-5)			1.2 X 50μS 6kV (Apply standard wave form)
Fast transient burst (IEC1000-4-4)			2.5kV/5min
Environment	Temperature	Operation	-25°C ~ 70°C
		Storage	-30°C ~ 80°C
	Humidity		-30% ~ 90%RH (No freezing)
Display	7-Segment		3-phase current, cause of a fault
	Bar-graph		60% ~ 110% of real load current
Mounting type			35mm DIN-rail/Panel
Note 1.) In extension type, the digital EMPR is calibrated by combining the display part and the main-body. Do not order the 'Display and the Main body' separately using different part numbers they must be ordered as a complete item so they can be calibrated.
Note 2.) Instantaneous short circuit protection is optional.
Note 3.) Operational voltage of AC 110V and 50Hz is optional.